
HVAC
Saunier Duval Official technical service van livery
What we did
- Client
- Saunier Duval
- Sector
- HVAC
- Area
- Signage
- Type of work
- Vehicles · Fleets
- Location
- Spain
Livery for a Ford Transit Courier van for the Saunier Duval Official Technical Service. Red graphics with diagonal shapes run along the lower sides and across the whole rear, and the logo, technical service identification, website and phone number were applied over the white bodywork. Unical Graphic produced and applied the livery in the workshop.
The challenge
The engineer's van is the first thing the customer sees at the door: it had to show that this is the brand's official service and stay consistent with Saunier Duval's red and white identity. The graphics had to cross doors and the wheel arch without breaking the line of the diagonals.
Our solution
The red shapes were printed on cast vinyl with laminate and applied to the lower half of the sides, lining up the diagonals between the front door and the sliding door. The rear was resolved with the same wraparound graphics and the logo set high. The service, website and phone lettering was cut in vinyl and placed on the white areas, where it reads cleanly. Application was carried out panel by panel, with cuts at seals and handles.
Materials used
- Printed cast vinyl for the red graphics
- Protective laminate against washing and UV
- Cut vinyl for logo, lettering and contact details
- Set-out of the diagonals across the doors
- Workshop application by our own crew
Results
- Van clearly identified as the brand's official service
- Graphics consistent with Saunier Duval's red and white identity
- Diagonals running continuously across doors and wheel arch
- Contact details legible on clean areas of the vehicle
The work up close
Similar projects
Want a similar project?
Tell us your idea and we'll help make it a reality.






