We use cookies

    We use our own and third-party cookies to improve your experience and analyze traffic. Cookie policy

    Skip to content
    937 50 23 04Get a quote
    Home · Signage · Vehicle signage
    Tibau Team – Assistance truck livery for the 2024 Dakar — Unical Graphic
    Own workshop · Cabrera de Mar

    Vehicle wrapping

    Your brand,
    on every kilometre

    Vans, cars, trucks, motorbikes and special vehicles. Cast 3M and Avery vinyls installed in our own workshop and climate-controlled booth.

    • Exact templates by make, model and year
    • Removable vinyl that doesn't damage the paintwork
    • 24-48 h turnaround for single vehicles

    Get a quote for your vehicle

    We reply the same working day.

    Request a quote No obligation · we reply today
    The service

    What vehicle signage is and when it's worth it

    Wrapping a vehicle means applying printed or cut vinyl to the bodywork to turn a car, van, truck or motorbike into a branding surface. It can be partial, with the logo, services and phone number over the original paintwork, or full, covering the whole bodywork and changing the vehicle's colour.

    It's worth it when the vehicle spends hours on the street or parked in view: you pay once and it works every day for as long as the vinyl lasts. It's especially cost-effective for self-employed tradespeople, installers, delivery and home-service businesses, where the vehicle arrives before the person. And since quality vinyl is removed with heat without damaging the paintwork, it also suits leased or rental vehicles.

    This page covers single vehicles. If you have several and want a consistent look with a scheduled rollout, we explain it on fleet signage for companies; if what you need is the shopfront or window of your premises, that's covered on commercial signage for premises. You'll find the rest of our solutions on Unical's signage service.

    Vehicle types

    Every bodywork
    is wrapped differently

    A car, a van with corrugated panels and a curtain-sided trailer have nothing in common when it comes to wrapping: the vinyl, the application technique, the workshop time and the durability all change. These are the vehicles that come through our workshop.

    Loading 3D scene
    Vehicle type01 / 06

    The most common case and the one that gives the best return: a large, flat surface at eye level. We work with exact templates by make, model and wheelbase, which lets us use the full side panels without cutting the design at the mouldings.

    Quote for a van →

    Materials and finishes

    Vinyls, technique
    and warranty

    With vehicles, 80% of the result comes down to two things: the quality of the vinyl and where it's applied. A good vinyl badly installed will lift within three months.

    Cast 3M and Avery vinyls

    Cast, not calendered: they conform to curves and rivets without shrinking or lifting. Manufacturer's warranty of five to ten years outdoors.

    LocationOutdoor
    Durability5-10 years

    Protective laminate

    A top layer with UV filter that protects the print from sun, pressure washing and scratching. Without lamination, a print loses colour within a couple of summers.

    LocationOutdoor
    Durability+2 years of life

    Climate-controlled booth

    We apply it indoors at a controlled temperature. Vinyl fitted outdoors or in the cold traps moisture and bubbles that appear weeks later.

    LocationWorkshop

    Model-specific templates

    We work from a database of templates by make, model and year, so the design is fitted to the real bodywork before anything is printed.

    LocationWorkshop

    Removable vinyl

    Low, controlled-tack adhesive for leased vehicles, campaigns and sponsorships. It's removed with heat without leaving residue or lifting paint.

    LocationOutdoor
    Durability2-3 years

    Approved reflective strips

    Approved contour tapes and regulatory markings, mandatory on certain industrial and emergency vehicles.

    LocationOutdoor
    DurabilityApproved

    How we work

    From template
    to vehicle on the road

    1. Step 01

      Vehicle data collection

      We need the make, model, year and wheelbase, plus photos of all four sides. From that we build the design on the exact template for your vehicle.

    2. Step 02

      Design on the real template

      You get the design built on the actual outline of your vehicle, not a generic drawing. That way you can see where mouldings, handles and windows fall before anything is printed.

    3. Step 03

      Printing and laminating

      We print with outdoor inks onto cast vinyl and laminate it. The material rests before being cut, which is what stops the vinyl shrinking once installed.

    4. Step 04

      Application in the booth

      Thorough cleaning and degreasing, application at a controlled temperature, post-heating of rivets and curves, and a final check. The vehicle leaves the same day or the next.

    01 / 04
    Which wrap to choose

    Partial, full or removable

    The decision doesn't depend on the type of vehicle but on three questions: whether the current colour matches your brand, how long the design will stay on, and whether the vehicle is yours or leased.

    OptionWhat it coversIdeal useDurabilityRelative cost
    Partial wrapLogo, services and contact details over the original paintworkVehicles whose colour already matches the brand5-8 years with laminated cast vinylLower
    Full wrap (car wrapping)The whole bodywork, with a colour changeVehicles in a colour unrelated to the brand5-8 years with laminated cast vinylHigher
    Removable vinylPartial or full, with controlled-tack adhesiveLeasing, campaigns and sponsorships2-3 yearsLower

    Car wrapping: a full wrap with a colour change. The whole bodywork is covered in cast vinyl in gloss, matte, satin or special-effect finishes, and it comes off with heat without damaging the original paint. We use it both to put a fleet in the brand colour and for private owners and dealerships who want to change a car's colour without repainting it.

    Rear windows only accept perforated vinyl, and a full colour change must be reported on the vehicle's technical registration document.

    Not sure between partial and full? Tell us about your vehicle →
    Indicative prices

    How much it costs to wrap a vehicle

    The price is calculated per vehicle: the make, model and wheelbase set the surface area, and from there what matters is how much is covered and with which vinyl. That's why we give a fixed quote for your specific vehicle, not a price per metre.

    Typical setWhat's includedFrom
    Car · partialLogo, services and phone number on the doors and rear100 €
    Van · partialSides and rear on the model's template100 €
    Van · fullThe whole bodywork, with parts removal1.500 €
    Truck · cabCab sides and front120 €
    Delivery motorbikeBrand, service and phone number on the fairing or top box60 €

    What affects the quote

    • Size and shape of the bodywork. Wheelbase, height and number of curves and rivets.
    • Surface covered. From a few cut vinyls to the full bodywork.
    • Type of vinyl. Cast, removable, perforated for windows, or reflective.
    • Design. Whether you bring vector files or we need to vectorise or design from scratch.
    • Disassembly. Handles, lights and mouldings on full wraps.
    Send us your model and photos on WhatsApp

    Google reviews

    What our clients say

    5,044 reviews on Google

    • 5/5

      Confiamos en Unical para rotular todo un edificio y fue todo un éxito. Muy buenos profesionales con un trato excelente. Experiencia de 10.

      Gerard Duran egeaGoogle · Original review in Spanish

    • 5/5

      Los mejores profesionales del sector. Siempre que pedimos algo, lo hacen a la perfeccion y encima super eficientes. Tienen mucha vista y el asesoramiento es muy bueno. Sitio de confianza.

      Pere Company RoigGoogle · Original review in Spanish

    • 5/5

      Profesionales con Mayúsculas! Muy contento por haber dado con ellos. El resultado es justo lo que buscaba, y con un tiempo de respuesta increíble.

      GabrielGoogle · Original review in Spanish

    See all reviews on Google →
    Frequently asked questions

    We answer your questions

    Everything people ask us before ordering vehicle signage: timelines, licences, materials, installation and warranty.

    Can't find your question?

    Ask us directly

    What is car wrapping and how is it different from painting the car?

    Car wrapping means covering the whole bodywork in cast vinyl to change its colour or give it a brand's look. Unlike paint, it is reversible: it comes off with heat without damaging the original paint, which is also protected from the sun and light scratches while the vinyl is on. It allows finishes that are hard to achieve with paint (matte, satin, effects) and the vehicle is ready in days, not weeks.

    How much does a full car wrap cost?

    It depends on the model, the surface and the vinyl you choose. As a guide, a van with a full wrap starts from €1,500, including removal of parts. To give you a fixed price we need the make, model and a few photos of the vehicle; send them by WhatsApp or through the form and we will reply the same working day.

    Does the vinyl damage the vehicle's paintwork?

    No, as long as the vinyl is good quality and the vehicle is in good condition. The cast vinyls we use have adhesive designed to be removed with heat without leaving residue, and in fact the covered area usually stays in better condition than the rest of the bodywork, because it's been protected from the sun. Problems arise in two cases: if the paintwork was already damaged, rusted or a poorly done respray, in which case it may lift when the vinyl is pulled off; or if cheap vinyl with aggressive adhesive has been used. When we receive the vehicle we check the condition of the paintwork and warn you if we spot any risk areas before applying anything.

    How much does it cost to wrap a vehicle?

    It depends on the vehicle and how much is covered, but as a guide: a partial wrap for a car or van starts from €100, a truck cab from €120, a delivery motorbike from €60, and a full van wrap from €1,500. From there, the price is driven by the size of the bodywork, the type of vinyl, whether the design needs to be created from scratch, and any parts removal. With the make, model and a few photos of the vehicle, we'll give you a fixed quote.

    How long does it take to wrap a van?

    For a single vehicle, between one and two days in the workshop once the design is approved. A partial wrap, with logo, services and phone number, is usually done the same day. A full wrap covering the whole bodywork needs two working days, because some parts have to be removed, it's applied in sections, and time is needed for post-heating. On top of that there's the earlier design and approval stage, which is normally two or three days. If you have a specific date, let us know when requesting a quote and we'll book the booth.

    How long does vehicle signage last?

    With laminated cast vinyl, between five and eight years under normal use in our area. The factors that shorten its life the most are constant direct sun, high-pressure water aimed directly at the vinyl's edges, and harsh cleaning products. A vehicle that's garaged overnight easily reaches the upper end of that range. The colours most prone to fading are intense reds and oranges; UV lamination is precisely what slows that down, which is why we never skip it outdoors.

    Can I wash the vehicle in a car wash?

    Yes, although it's best to wait a week after application for the adhesive to fully cure. After that, a normal car wash is no problem for vinyl that's been properly installed and laminated. What we do recommend avoiding is a pressure washer aimed close up and perpendicular to the vinyl's edges, which is the quickest way to lift an edge. If you use a pressure washer, keep it more than thirty centimetres away and at an angle. For everyday cleaning, water, mild soap and a soft sponge are enough.

    What's the difference between a partial and a full wrap?

    The partial option covers specific elements over the original paintwork: logo, services, phone number, website and perhaps a stripe. It's the most common choice, comes out much cheaper, and works perfectly if the vehicle's colour already matches the brand. The full wrap, or car wrapping, covers the entire bodywork and changes the vehicle's colour completely, and requires removing handles, lights and mouldings to tuck the vinyl under the edges. It costs quite a bit more and needs more workshop time, but it's the only option if the vehicle is a colour that has nothing to do with your identity, or if you want a uniform fleet image starting from cars of different colours.

    I have a leased vehicle — can I wrap it?

    Yes, and it's a very common case. The key is to use removable vinyl, with controlled-tack adhesive that comes off cleanly with heat and leaves no residue. When you return the vehicle we leave it as it was, with no issues over the deposit or damage penalties. Tell us from the start that it's leased, because it changes the material we use, and it's also worth checking your contract: some leasing companies require prior written authorisation to wrap the vehicle, even with removable vinyl.

    Can you wrap a single vehicle, or do you only work with fleets?

    We work with single vehicles without any problem, and in fact it's a significant part of what we do. Self-employed tradespeople, shops and small businesses often start with one van. If what you have is a fleet of several vehicles and you want to make them consistent with a scheduled rollout, shared templates and a per-unit price, we cover that on the fleet signage page, which is designed for that scenario.

    Do I need to have the design ready?

    No. If you have a brand manual or vector files, we'll use them; and if all you have is a logo as an image, or not even that, we'll vectorise it or design it from scratch. What we always do is build the proposal on the real template for your make, model and year, not on a generic drawing, so you can see exactly where the mouldings, handles and windows fall. A common mistake in designs made without a template is placing the phone number right where there's a moulding or a sliding door, splitting the number in two.

    What information should you include, and what's unnecessary?

    The practical rule is that a vehicle is read in three seconds from another car or from the pavement. That leaves room for three things: what you do, your name, and how to reach you — usually a phone number or a short website, never both plus an email address and social media. The sides can carry a bit more information because they're read while parked; the rear is the point of greatest real visibility, since the car behind has it in view at every traffic light, so that's where the essentials go, in large type. Long postal addresses and small-print lists of services don't get read by anyone.

    Is there anything that can't be wrapped due to regulations?

    Yes, and it's worth being clear on this before designing anything. Windows can't be covered in a way that reduces the driver's visibility: the windscreen and front side windows can't be wrapped, and rear windows only with perforated vinyl that allows visibility from inside. Number plates, lights, reflectors and approved reflective elements can't be covered either. Designs that could be mistaken for emergency or police vehicles must be avoided, including chequered patterns or red and blue stripes. And if the colour change is a full wrap, the colour change must be reported on the vehicle's technical registration document.

    Do you manufacture in-house, or do you subcontract?

    We manufacture it ourselves. The vinyl is printed and laminated at our workshop in Cabrera de Mar, and it's installed by our own team, without subcontracting. We've been working this way for more than 32 years, and a single point of contact follows your vehicle from start to finish, so the person who takes your details is the one who's accountable for the result.
    Other Signage services

    You might also be interested in

    Commercial signage→Illuminated signs→3D letters→Corporate signage→Fleet signage→All signage services→
    Where we work

    Vehicle wrapping across Spain

    We wrap at our workshop in Cabrera de Mar (Barcelona), and our team travels to your premises to wrap cars, vans and fleets in other cities.

    Vehicle wrapping in Barcelona→Vehicle wrapping in Madrid→Vehicle wrapping in Valencia→Vehicle wrapping in Seville→Vehicle wrapping in Bilbao→Vehicle wrapping in Zaragoza→Vehicle wrapping in Girona→Vehicle wrapping in Vigo→

    Request your quote

    Make your vehicle work even parked

    Fixed quote per vehicle. Appointment at our workshop in Cabrera de Mar or arranged pick-up.

    Request a quote

    Data controller: UNICAL GRAPHIC, S.L. We only use your data to answer your request and prepare your quote, and we never share it with third parties. You can access, correct or delete it by writing to nico@unical.es. More information in our privacy policy.